Difficulty

Easy

Steps

6

Time Required

                          1 minute

Sections

3

  • Battery
  • 2 steps
  • Disassembling Sony Cyber-shot DSC-T1 Removing Front Cover
  • 2 steps
  • CCD Sensor Module
  • 2 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSony Cyber-shot DSC-T1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Locate the battery door at the bottom of the camera.
  • Press down on the door and slide it back. The door will pop open.

Locate the battery door at the bottom of the camera.

Press down on the door and slide it back. The door will pop open.

1024

Step 2

  • Remove the battery from the door that you opened in the previous step.

Remove the battery from the door that you opened in the previous step.

Step 3

              Disassembling Sony Cyber-shot DSC-T1 Removing Front Cover
  • There are two screws on the left and right sides of the camera, and two screws on the bottom.
  • Use a PH00 screwdriver and remove the six 2.9mm screws.

There are two screws on the left and right sides of the camera, and two screws on the bottom.

Use a PH00 screwdriver and remove the six 2.9mm screws.

Step 4

  • Use hands to gently pry the front casing away from the camera.

Use hands to gently pry the front casing away from the camera.

Step 5

              CCD Sensor Module
  • Use the tip of a spudger to flip up the tab on the ZIF connector securing the motherboard ribbon cable.
  • The second picture shows what these tabs look like in their open positions.

Use the tip of a spudger to flip up the tab on the ZIF connector securing the motherboard ribbon cable.

The second picture shows what these tabs look like in their open positions.

Step 6

  • Grasp the CCD Sensor Module and remove it.

Grasp the CCD Sensor Module and remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 12 other contributors 


                    iDeleted

Member since: 07/07/2010

2,101 Reputation

                                      39 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges