Difficulty

Easy

Steps

8

Time Required

                          10 minutes

Sections

1

  • LCD Screen
  • 8 steps

Flags

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackSony α6000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD Screen
  • Remove the two 1.75mm Phillips #00 screws located on the bottom border of the LCD screen.

Remove the two 1.75mm Phillips #00 screws located on the bottom border of the LCD screen.

1024

Step 2

  • Remove the two 1.75mm Phillips #00 screws located on the back side of the LCD screen.

Remove the two 1.75mm Phillips #00 screws located on the back side of the LCD screen.

Step 3

  • Carefully separate the bottom border of the frame from the back surface of the LCD screen.

Carefully separate the bottom border of the frame from the back surface of the LCD screen.

Step 4

  • Remove the silver shield from the back side of the LCD screen.

Remove the silver shield from the back side of the LCD screen.

Step 5

  • Remove the smaller bracket covering the bottom portion of the control board.

Remove the smaller bracket covering the bottom portion of the control board.

Step 6

  • Carefully remove the spacer from behind the LCD screen.

Carefully remove the spacer from behind the LCD screen.

Step 7

  • Detach the ribbon from the socket with a pair of tweezers.

Detach the ribbon from the socket with a pair of tweezers.

Step 8

  • Pull the LCD screen away from the camera and set aside.

Pull the LCD screen away from the camera and set aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Rohn Albertson

Member since: 07/14/2019

600 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       IUPUI, Team S2-G2, Harley Summer 2019                        

                                                  Member of IUPUI, Team S2-G2, Harley Summer 2019 



                    IUPUI-HARLEY-SU19S2G2                     


                                            3 Members                     


                                            4 Guides authored

Rawr Peng - Jun 18, 2022

Reply

Step 2 makes this repair impossible, the LCD screen is stuck at an angle where it’s impossible to get a normal Phillips onto it without stripping the screw. Horribly inaccurate picture of how ’easy’ it is to put the screwdriver there. Don’t follow this guide.