Sodastream Source Battery Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes            

Sections

2

• SodaStream Source External Disassembly
• 5 steps
• Battery
• 1 step

Flags

0

• BackSodaStream Source

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              SodaStream Source External Disassembly               

• Remove the soda bottle and the CO2 canister from the machine.

Remove the soda bottle and the CO2 canister from the machine.

1024

Step 2

• Remove the four 17.8 mm screws from the bottom metal base using a Phillips #1 screwdriver.

Remove the four 17.8 mm screws from the bottom metal base using a Phillips #1 screwdriver.

Step 3

• Pull the outer cover away from the front of the device.

Pull the outer cover away from the front of the device.

Step 4

• Remove the two 18.2 mm screws from the bottom of the front cover using a Phillips #1 screwdriver.

Remove the two 18.2 mm screws from the bottom of the front cover using a Phillips #1 screwdriver.

Step 5

• Firmly pull the front cover off.
• This piece is difficult to remove and requires force. It may help to use a wide, thin object to pry it off (like a Jimmy).

Firmly pull the front cover off.

This piece is difficult to remove and requires force. It may help to use a wide, thin object to pry it off (like a Jimmy).

Step 6

              Battery               

• Remove the old battery and replace it with a new 3V lithium battery.

Remove the old battery and replace it with a new 3V lithium battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      20 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Alexandra I Curtis                     

Member since: 02/20/2017

836 Reputation

                                      2 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges                           

Team

                       USF Tampa, Team S1-G4, Leahy Spring 2017                        

                                                  Member of USF Tampa, Team S1-G4, Leahy Spring 2017 



                    USFT-LEAHY-S17S1G4                     


                                            3 Members                     


                                            40 Guides authored                     

tomclaes1989 - May 30, 2017

Reply

Heel de achterkant hoeft er hiervoor niet af hoor juist de voorkant 2 vijsjes en je kan het voorste deksel er af klikken ;)

Kevin Shiner - Oct 9, 2017

Reply

Perfectly explained! I was afraid to pull the front cover because it does indeed take a lot of force to pull off!!

its important to note it’s a C123A 3v battery, not the C2 3v as I found out after opening

Dancingdaisy007 S - Nov 8, 2017

Where is the best place to find these batteries? Canadian tire?

Kal Jak - Sep 8, 2021

Its the same battery many many products use usually built in , motherboards used it for years.

scottvelasco - May 15, 2018

Reply

Staples has the 123A 3v battery