Difficulty
Easy
Steps
3
Time Required
4 minutes
Sections
1
- Shark ION Robot R75 Caster Wheel
- 3 steps
Flags
0
BackShark ION Robot R75
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Shark ION Robot R75 Caster Wheel
- Orient the device with the bottom facing up.
Orient the device with the bottom facing up.
1024
Step 2
- Using a plastic opening tool, pry first one side of the wheel, then the other out of the caster.
- Remove the wheel.
Using a plastic opening tool, pry first one side of the wheel, then the other out of the caster.
Remove the wheel.
Step 3
- Using a Torx TR9 screwdriver, remove both screws from the caster assembly beneath the wheel.
- Pull the caster assembly up from its slot in the device.
Using a Torx TR9 screwdriver, remove both screws from the caster assembly beneath the wheel.
Pull the caster assembly up from its slot in the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Kyle Wilbourn
Member since: 01/25/2020
489 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
Embry-Riddle Aeronautical University, Team S3-G6, Watkins Spring 2020
Member of Embry-Riddle Aeronautical University, Team S3-G6, Watkins Spring 2020
ERAU-WATKINS-S20S3G6
4 Members
14 Guides authored
