Difficulty
Moderate
Steps
6
Time Required
15 - 30 minutes
Sections
1
- Front Lens Cover
- 6 steps
Flags
0
BackSamsung NX1000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Lens Cover
- Unscrew the four 5.5 mm #000 Philips screws that are on the metal ring with a Philips #000 screwdriver.
Unscrew the four 5.5 mm #000 Philips screws that are on the metal ring with a Philips #000 screwdriver.
1024
Step 2
- Remove the metal ring using the plastic opening tool.
Remove the metal ring using the plastic opening tool.
Step 3
- Remove the black plastic ring using the plastic opening tool.
Remove the black plastic ring using the plastic opening tool.
Step 4
- Remove the thin metal ring.
Remove the thin metal ring.
Step 5
- Remove the three 4.5 mm Phillips #000 head screws located inside the cover with a Phillips #000 screwdriver.
Remove the three 4.5 mm Phillips #000 head screws located inside the cover with a Phillips #000 screwdriver.
Step 6
- There are a few loose metal parts and springs. Be careful not to shake the device.
- Remove the white plastic ring.
There are a few loose metal parts and springs. Be careful not to shake the device.
Remove the white plastic ring.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 6 other contributors
Yesenia
Member since: 01/22/2015
717 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 20-13, Maness Winter 2015
Member of Cal Poly, Team 20-13, Maness Winter 2015
CPSU-MANESS-W15S20G13
4 Members
14 Guides authored
