Difficulty

Moderate

Steps

8

Time Required

                          45 minutes

Sections

1

  • Display Assembly with Frame
  • 8 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSamsung Galaxy A50

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Video Overview

Step 1

              LCD Display Assembly replacement
  • Display Touch Screen Digitizer Assembly with Frame for Samsung Galaxy A50

Display Touch Screen Digitizer Assembly with Frame for Samsung Galaxy A50

1024

Step 2

              Battery cover removal
  • Heat up the back cover to loosen the adhesive.
  • To separate the back cover use a Suction Cup and plastic tools.

Heat up the back cover to loosen the adhesive.

To separate the back cover use a Suction Cup and plastic tools.

Step 3

              Middle frame removal
  • Remove the SIM tray.
  • Remove the Philips Screws.
  • Again use plastic tools to separate the middle frame.

Remove the SIM tray.

Remove the Philips Screws.

Again use plastic tools to separate the middle frame.

Step 4

              Test the new spare part
  • First disconnect the Battery.
  • Test the new spare part before the installation.

First disconnect the Battery.

Test the new spare part before the installation.

Step 5

              Logic board removal
  • Disconnect and remove the Main Flex Cable.
  • Remove the black Philips screw, it’s shorter then the middle frame screws.
  • Disconnect the coaxial antenna cable.
  • Now you can remove the logic board.

Disconnect and remove the Main Flex Cable.

Remove the black Philips screw, it’s shorter then the middle frame screws.

Disconnect the coaxial antenna cable.

Now you can remove the logic board.

Step 6

              Sub board removal
  • First remove the Fingerprint sensor.
  • The screws for the Fingerprint are shorter.
  • It’s better to use hot air before to disassemble the sub-board.
  • Reminder - only plastic tools :)

First remove the Fingerprint sensor.

The screws for the Fingerprint are shorter.

It’s better to use hot air before to disassemble the sub-board.

Reminder - only plastic tools :)

Step 7

              Battery removal
  • Again, hot air, plastic tools and very slowly remove the battery.

Again, hot air, plastic tools and very slowly remove the battery.

Step 8

  • All’s Well That Ends Well

All’s Well That Ends Well

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    ZFix

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored

knezi - Jun 22, 2022

Reply

The frame I bought doesn’t have the place for earspeaker surrounded by little “walls”, so it’s very loose and doesn’t have contact with the board. Anyone experienced this?