Difficulty
Very easy
Steps
3
Time Required
2 - 3 minutes
Sections
1
- Film Cartridge Door
- 3 steps
Flags
0
BackRicoh Super 8 800z
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Film Cartridge Door
- Pull the film cartridge door release lever towards the eyepiece to open the film cartridge door.
Pull the film cartridge door release lever towards the eyepiece to open the film cartridge door.
1024
Step 2
- Remove the two screws from the center of the spring plate, located on the camera side of the film cartridge door hinge, with a Phillips #00 screwdriver.
- Remove the spring plate from the hinge.
Remove the two screws from the center of the spring plate, located on the camera side of the film cartridge door hinge, with a Phillips #00 screwdriver.
Remove the spring plate from the hinge.
Step 3
- Remove the two outer screws from the camera side of the door hinge with a Phillips #00 screwdriver.
- Remove the film cartridge door from the camera body.
Remove the two outer screws from the camera side of the door hinge with a Phillips #00 screwdriver.
Remove the film cartridge door from the camera body.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Michael Flynn
Member since: 01/30/2020
97 Reputation
1 Guide authored
Badges:
2
Team
Embry-Riddle Aeronautical University, Team S17-G10, Lamothe Spring 2020
Member of Embry-Riddle Aeronautical University, Team S17-G10, Lamothe Spring 2020
ERAU-LAMOTHE-S20S17G10
4 Members
10 Guides authored
