Difficulty

Easy

Steps

7

Time Required

                          5 minutes

Sections

1

  • Removing Playstation 2 Slimline SCPH-7500x Outer Shell
  • 7 steps

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

  • BackPlayStation 2 Slimline SCPH-7500x

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removing Playstation 2 Slimline SCPH-7500x Outer Shell
  • Turn off the PlayStation 2 and carefully unplug it from the power source. Also, it is important to eject the CD from the console before flipping the it upside down.

Turn off the PlayStation 2 and carefully unplug it from the power source. Also, it is important to eject the CD from the console before flipping the it upside down.

1024

Step 2

  • Locate the six feet on the bottom of the PS2.
  • Five of these feet are in plain sight while the last foot is located under the black void sticker on the back of the device.
  • Some versions of the console, such as the PAL Version, may not have this sticker. In this case, the foot or the screw should be in plain sight.

Locate the six feet on the bottom of the PS2.

Five of these feet are in plain sight while the last foot is located under the black void sticker on the back of the device.

Some versions of the console, such as the PAL Version, may not have this sticker. In this case, the foot or the screw should be in plain sight.

Step 3

  • Remove the five visible feet from the bottom of the device using a spudger.

Remove the five visible feet from the bottom of the device using a spudger.

Step 4

  • Remove the sticker and then remove the 6th foot.

Remove the sticker and then remove the 6th foot.

Step 5

  • After all of the feet have been removed, Use a Phillips #1 screwdriver to remove the six 4.0mm screws from the base of the PS2.

After all of the feet have been removed, Use a Phillips #1 screwdriver to remove the six 4.0mm screws from the base of the PS2.

Step 6

  • Once all of the screws have been removed, pry apart the plastic covers. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate the two sides.
  • You may need to apply some gentle force to detach the covers. Be careful not to break the plastic screw pins.

Once all of the screws have been removed, pry apart the plastic covers. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate the two sides.

You may need to apply some gentle force to detach the covers. Be careful not to break the plastic screw pins.

Step 7

  • If done correctly, you should have a fully detached plastic backing, revealing the electronic components of the PlayStation 2.

If done correctly, you should have a fully detached plastic backing, revealing the electronic components of the PlayStation 2.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 20 other contributors 


                    Jared Hirata

Member since: 04/09/2013

669 Reputation

                                      7 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 17-4, Regan Spring 2013                        

                                                  Member of Cal Poly, Team 17-4, Regan Spring 2013 



                    CPSU-REGAN-S13S17G4                     


                                            3 Members                     


                                            21 Guides authored