Difficulty

Moderate

Steps

4

Time Required

                          5 minutes

Sections

2

  • Disassembling RCA RCT6272W23 Case
  • 2 steps
  • Speaker
  • 2 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackRCA RCT6272W23

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disassembling RCA RCT6272W23 Case
  • Use a Phillips #00 screwdriver to remove both 4.1 mm screws at the top of the device which hold it together.

Use a Phillips #00 screwdriver to remove both 4.1 mm screws at the top of the device which hold it together.

1024

Step 2

  • Press the plastic opening tool into the space between the front and back portions of the case.
  • Run it along the perimeter of the device to unhook the plastic tabs.
  • Gently pull both sides apart.
  • The speaker is connected to the back cover, so be careful when separating.

Press the plastic opening tool into the space between the front and back portions of the case.

Run it along the perimeter of the device to unhook the plastic tabs.

Gently pull both sides apart.

The speaker is connected to the back cover, so be careful when separating.

Step 3

              Speaker
  • Remove the soldered wire connections to the speaker.
  • Soldering irons can cause burns and severely damage your device. If in doubt, pause and think about it.
  • For more information about soldering, check out this guide.

Remove the soldered wire connections to the speaker.

Soldering irons can cause burns and severely damage your device. If in doubt, pause and think about it.

For more information about soldering, check out this guide.

Step 4

  • Pry the speaker gently out of its plastic enclosure using a spudger.

Pry the speaker gently out of its plastic enclosure using a spudger.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Stephen Radachy

Member since: 03/17/2015

807 Reputation

                                      5 Guides authored                  



                       Badges:
                       18







                                                        +15 more badges

Team

                       Michigan Tech, Team 1-5, Lauer Spring 2015                        

                                                  Member of Michigan Tech, Team 1-5, Lauer Spring 2015 



                    MTU-LAUER-S15S1G5                     


                                            2 Members                     


                                            12 Guides authored