Patagonia Transport Roller Telescoping Handle Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Telescoping Handle
11 steps

Flags

Worn Wear

Patagonia and iFixit are celebrating the stories we wear by collaborating to provide guides for Patagonia’s most popular apparel repairs.

BackPatagonia Transport Roller
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

For replacement parts or further assistance, contact Patagonia Customer Service.

This guide is specifically for the Patagonia Transport Roller, Style Number 4905. If you aren’t sure which bag you have, here’s a guide that can help you identify the style number of Patagonia products.

What you need

Step 1

              Telescoping Handle

Lay your Transport Roller on its back on a table.
Unzip the main compartment.

Lay your Transport Roller on its back on a table.

Unzip the main compartment.

1024

Step 2

Flip open the main compartment of your bag.

Flip open the main compartment of your bag.

Step 3

Unbuckle the internal compression straps.

Unbuckle the internal compression straps.

Step 4

Unzip the the zipper in the gray inner lining of the bag, opening the lining as you go.

Unzip the the zipper in the gray inner lining of the bag, opening the lining as you go.

Step 5

Remove the two Phillips #1 screws from the retaining bracket at the bottom of the bag.
These screws are approximately 2 cm in length.

Remove the two Phillips #1 screws from the retaining bracket at the bottom of the bag.

These screws are approximately 2 cm in length.

Step 6

Remove the five Phillips #1 screws from the retaining bracket at the top of the bag.
These five screws are 1.5 cm in length, visibly shorter than the screws removed from the bottom retaining bracket.

Remove the five Phillips #1 screws from the retaining bracket at the top of the bag.

These five screws are 1.5 cm in length, visibly shorter than the screws removed from the bottom retaining bracket.

Step 7

Remove the black plastic retaining bracket from the top of the frame.

Remove the black plastic retaining bracket from the top of the frame.

Step 8

Using your thumb, depress the button on the telescoping handle.
With the button depressed, extend the handle by pulling away from the bag.

Using your thumb, depress the button on the telescoping handle.

With the button depressed, extend the handle by pulling away from the bag.

Step 9

Turn the bag over so that the back is facing up.
Remove the telescoping handle assembly by pulling it out of the top of the bag.
This step may take some force. It may help to push down on the back of the bag while pulling up on the outer edge of the plastic handle guard so the screw anchors can move up and out of the holes in the hard backing.

Turn the bag over so that the back is facing up.

Remove the telescoping handle assembly by pulling it out of the top of the bag.

This step may take some force. It may help to push down on the back of the bag while pulling up on the outer edge of the plastic handle guard so the screw anchors can move up and out of the holes in the hard backing.

Step 10

If you are having trouble with your handle, check the pins inside the bag.
When you depress the button on the handle, the two pins on the sides of the handle should retract, freeing the handle to slide.
If either pin is not retracting when the button on the handle is depressed, push the pin into the hole using your finger or another thin object such as a pencil or screwdriver.

If you are having trouble with your handle, check the pins inside the bag.

When you depress the button on the handle, the two pins on the sides of the handle should retract, freeing the handle to slide.

If either pin is not retracting when the button on the handle is depressed, push the pin into the hole using your finger or another thin object such as a pencil or screwdriver.

Step 11

With the pin depressed, pull the handle to extend it from the bag.

With the pin depressed, pull the handle to extend it from the bag.

To reassemble your luggage, follow these instructions starting with Step 9. You’ll be working backwards now from that point in the guide, following the steps in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Marty Rippens

Member since: 09/18/2015

14,409 Reputation

                                      2 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored

Worn Wear#

Introduction#

What you need#

Team#

Worn Wear

Introduction

What you need

Team